Airslide Polyester Filament Canvas Fabric
Product Description
Airslide cement air slide fabric
We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material.
Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns. We are also however able to weave fabrics to our customers' specific demands for air permeability and mechanical strength.
ADVANTAGES
No moisture absorption
No caking
Resistant to rotting and decomposition
Complete unloading without residues
Consistent fluidization over the complete surface
Good resistance to abrasion
Low wear and therefore longer life
Low shrinkage even when used under hot and humid conditions
Specification
Raw Material | 100% spun fiber polyester | |
Weight in average | 4000 g/m2 | |
Thickness | 5mm | |
Mean Air Permeability | 400 m3/m2h @350H2O | |
Pressure | 2000pa for middle air resistance | |
4000pa for high air resistance | ||
Breaking Strength | Wrap | >6000 N/5cm X 20cm |
Weft | >3000 N/ 5cm X 20cm | |
Breaking Elongation | Wrap | <5% |
Weft | <5% | |
Max Width | 2800mm | |
Operating Temperature | < 150 deg.C | |
Recommended Maximum Continues | < 180 deg.C | |
Recommended Maximum Surge | = 180 deg.C |
IN INDUSTRY
Power Stations Filtered dust Flue ash, discharging flue ash Coal dust Building and Construction Cement, furnace dust, gypsum, limestone, finely ground quartz, Calcium hydroxide, lead monoxide,
quicklime, acid crystals, Pure clay, phosphates, magnesite concentrate, finely ground fluorid, production of aluminum
Chemical Industry Thomas meal (Fertilizer) Rubber compounds, sinter dust, catalysts Sodium sulfate Soap powder
IN MACHINERY
Silos / Tanks Discharging systems Warehouse units Mixing equipment Homogenizing systems Chute Bottoms Conveyor systems Ventilator systems Aeration systems Vehicles Silo truck discharging cones Railway wagon discharging
cones Vessel aeration & discharging bottoms Container aeration & discharging bottoms Powder Coating Machinery Bottoms for sinter basin.
Packaging Details
Package: 1pc per package, 5-10pcs per carton
Shipment: Sea, Air Express as customer's request.
Goodmax International Group Limited is a collection of Producing and trading as one integrated enterprise. It is dedicated to becoming the specialist of cement spare part purchasing and service for cement manufacturers all around the world. Our main business include: Supplying management of analysis and consultancy of cement spare part, spare part integration procurement, spare part reserve and cement production guarding. Our product and service had developed to Middle East, South East Asia, etc.
Based on powerful research & development team and technical advantage of main design institutes and research institute, cooperating with global famous suppliers for cement equipment, special spare part and complete sets with brand, forming strategic union with them, the company achieves specialty, scientific and standardization of cement spare part, adopting modern system of physical distribution management and information network, in conformity with the operating concept "cooperation benefits both parties and to achieve high steadiness”.
Since establishment, we have built and keep the good relationships of cooperation with more than 300 cement spare part and equipment manufacturers and suppliers all around the world. In accordance with service concept “Economization; Carefree; Timeliness and Comprehensive", it shall serve for numerous cement manufacturers by supplying fast, qualified favorable products and honest, thoughtful and efficient service.
1. What is your terms of payment?
A: T/T 30%~50% as deposit, and balance before delivery. We'll show you the photos of the products and packages before you pay the balance.
2. How about your delivery time?
A: Generally, it will take about 10-15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
7: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.